Up to 30 Extensions can be connected to a Miniservers Link Interface according to the following diagram:Ĭonnect the Extensions to a Miniserver by daisy-chaining the Link interfaces. Then follow the instructions for the Initial Setup to create your new project with the Miniserver. The factory settings for user and password are: admin/admin You can then search for the Miniserver in Loxone Config and connect. If both Miniserver and computer are set to DHCP, they will use a .x link-local address.Īlternatively, you can manually assign a static IP address to the Miniserver and computer to enable a direct connection. If there is no DHCP server in your network, or if the Miniserver is connected directly to a PC, link-local addressing via Zeroconf is supported. The right LED indicates whether any System Status messages are available.Īt first startup with factory settings, the Miniserver is assigned an IP address by the router via DHCP. Once the boot up process is complete, the left status LED will blink green once every second. The Miniserver starts after the power supply is turned on, and will be operational within a few seconds. Information on connecting additional devices. Via the LAN port the Miniserver is connected to the local network or a WiFi router. The Miniserver is installed on a DIN rail in a suitable enclosure.Ĭonnect the power supply, as well as inputs/outputs and interfaces, if applicable. Up to 30 Extensions can be added to the Miniserver via the Link interface to add additional functions such as inputs, outputs or interfaces.Ī Loxone Tree interface is also integrated to connect sensors and actuators throughout the building. It features 8 potential free relays, 8 digital inputs and 4 analogue inputs (0-10V). The LAN interface is used for programming and the integrated web server allows the control of the system via a web interface or the Loxone App. The replaceable microSD card contains the operating system as well as the user programming and settings. The Loxone Miniserver serves as central control unit for all kinds of automation tasks.
0 Comments
Leave a Reply. |